Pages

Tuesday, January 29, 2013

Le Singularite - 100% Brett Update

Small krausen showing with first visible sign
of fermentation 30-40 hours after pitching.
Just a quick update.  I brewed on Sunday evening with the yeast going into the carboy around 11pm.  I pitched the White Labs Brettanomyces claussenii yeast directly from the vial – no starter.  I used the claussenni because the anomalus is no longer being made and according to the White Labs website the claussenii is similar to the anomolaus.

There was no visible sign of fermentation before I left this morning for work.  12 hours later there is airlock activity and a small krausen.  The smell is pretty standard right now.  Temperature is currently 72 degrees.  I will provide another update once some new info is available.  


Brew Day: Le Singularite

This past Sunday I brewed up a 3 gallon batch of Le Singularite.  This is a recipe pulled from the Wild Brews book previously mentioned.  Wheat, Pilsner and Acid malt made up the grain bill and one strain of Brettanomyces. 

Since Brett yeasts create the acid and esters commonly found in sours I am expecting this to have some earthy esters with a slight tart finish.  I do not think it will get to a full tart and dry sour beer since the recipe states that fermentation should only be about 1-2 months (depending on the temprature)

Mash was low temperature and longer - 90 minutes.

The mash had some trouble straining on the first pass and it looked like a wet sandy beach.  The batch sparge runs after the initial drain were fine.

I collected 4.5 gallons of wort for the boil.  I figured 1.5 gallons of evaporation in a 90 min boil.  I actually ended up with 2.5 gallons of wort after the boil.  I added another half gallon of clean water to the carboy and measured the gravity at 1.060.  Only 0.01 off from what BeerSmith was predicting.

All in all, I think everything went smooth.  Now it's time to watch the fermentation to see how long it takes this Brett to get going.

Updates as they happen.

Saturday, January 26, 2013

Tasting Day: Wallonian Nights

Dark Saison after a pour in a Belgian Tulip glass.
Time to taste the new brew – Wallonian Nights.  This is a dark saison that uses dark candi syrup for the color.  I used a Belgian Saison yeast from White Labs.  So let's get to it.

Overview:  Dark Saison brewed with a Belgian yeast strain and dark candi syrup.
OG = 1.068
IBUs = 38
SRM = 28
ABV = 7.6%

Appearance:  Dark black beer that pours a small cream color  head. The head disappears quickly after the pour.  Small lacing is present while drinking the beer.

Smell: It actually has a very clean smell to it. It has a slight pepper smell which you smell in most Saisons. Pretty minimal all around though.

Taste:  I'm not sure what to make of the taste.  I think the color tricks you into what it should taste like.  Its a very clean tasting beer with some nice sweetness and has a bit of the "Belgian" taste from the yeast on the font end. On the backend there is a pepper/alcoholic finish.  The alcohol finish sits in the back of your throat for a while after you finish.

Overall:  It's an interesting beer.  For as crazy as the fermentation was I was expecting some crazy beer.  It's not nearly as complex as I was expecting.  Clean easy drinking beer upfront with some complexity on the back end.  It's still only two weeks in the bottle so maybe it will mature some more in the coming weeks. It's a beer worth exploring some more in future brews.

Cheers.

Thursday, January 24, 2013

Brew Updates

So - it's been a while but I figured I would update where I am on some things

  1. Wallonia Nights - After a month in the secondary I decided it was time to bottle my Dark Saision.  It went in the bottle two weeks ago.  I will be cracking into that one this weekend for a taste to see if it needs to sit longer and mature in the bottle some more.  I will most likely do a tasting post on that one later this week.
  2. Nugget Warrior (working title - I will most likely change this based on how it tastes since it didn't turn into the Nugget Nectar clone I hoped for) -  This was in the secondary for 9 days and then I dry hopped it for an additional 6 days.  I will say this much - the color was not what I was looking for but the aroma and hop presence is large.  Can not wait to try this one.
  3. Test Sours- I found out the hard way...  I had my original batch of soured wort and I brewed a clean batch to mix the two into different proportions and BOOM! I open up the 2 gallon bucket I had the clean beer in and to my suprise lactic bacteria took over. No wonder my gravity stopped dropping. I know some people say it is possible to clean plastic after having a sour in them but you should just save yourself the trouble and get separate equipment.  So, now what?  I mixed some of the soured wort into the 2 gallon batch of now soured red ale and decided that it is probably going to have enough twang that I am just going to pitch the dregs from a Monk's Cafe Flemish Ale and a bit of the Belgian Sour Blend from Whitelabs and just let it sit for a month or two. I will bottle it into some 750 ml bottles and see what happens.  Who knows... maybe something good will come of it.
Wild Brews book from Amazon
Good news is I will have two beers ready to taste very soon and report back on.  The bad news is that I need to restart my sour testing.  I'm off to the LHBS to get some more carboys (girlfriend is going to love that) and make a 2 gallon batch of soured wort and a 3 gallon clean batch.  So here is whats on deck:

  1. Quick Sour Tests
  2. Singularite Brett - A pale ale
    fermented with only
    Brettanomyces Claussenii.
    This is a recipe pulled from the
    Wild Brews
    book
  3. Sour Stout

Lots of Brett cultures flying around in the basement now.  Hopefully I can do a good
job and keep things separate. 

Friday, January 4, 2013

Brew Day: Nugget Copper Ale

Draining the wort after a 60 minute mash
Tonight I brewed up a batch of Nugget Copper Ale - a beer inspired by Nugget Nectar from Troegs Brewing Company.  Unfortunately I ran into some issues and I dont think this beer is going to turn out nearly what I hoped for.

Problem Number 1
After the first draining of the mash pal I noticed that color was way off.  It was running a lot more on the yellow side and not nearly enough amber was showing through.

After the boil the color was a copper-yellow orange.  I'm hoping once the sediment settles out and everything starts to clear it will be a bit more of a true copper color.

Problem Number 2
My original gravity reading is way too low.  I got a measured reading of 1.055 after my temperature adjustments.  My recipe called for 1.070.  After a closer look at my recipe in BeerSmith I noticed one reason it was lower - I did not boil for 90 minutes!  This would of made a more concentrated wort so this is one reason the beer will be a bit weaker than I was hoping for.

So the question is what went wrong?  I thought my mash temperatures were within range.  Is the SRM of the grain I used from the LHBS different from what I put in BeerSmith?

Next time I am in the shop I will have to ask the specifics and figure it out.

Bottom Line
I like hops.  And this beer has a lot of hops.  It just may be a bit weaker than I was hoping for and the color is a bit off.

We will find out in about 8 weeks if this was a failed night or if not.
Till then...